XL package - Truck Wash

With this package you clean your truck or commercial vehicle from the outside to the windows.

Use Multishine Truck Wash (1L) on:

• Polyester
• Plastic parts and rubber seals
• Tarpaulins
• Rims
• Varnished and unvarnished surfaces

Use ZWIK Glass Cleaner (1L) on:

• Windows, windscreens and mirrors
• Hard, treated surfaces
• Screens
• Stainless steel surfaces

Use the Broom Brush for:

• Large surfaces, without a ladder or bending down

Use the Hand Brush Deluxe for:

• Small corners and details

Use the Telescopic Pole (4.2 m) for:

• High and hard-to-reach places, such as windows, frames and fascias

Do not use on:

• Do not use Multishine on glass and mirrors (letting it run off diluted is fine)

Detailed instructions for use can be found on the labels on the bottles.

Multishine

1. Open the bottle by pressing the cap down firmly and turning it anticlockwise (child-resistant closure). After use, close the bottle tightly again until you hear a click.
2. Fill a bucket with warm water and add Multishine: 1 part product to 10-20 parts water. The more stubborn the dirt, the more Multishine you use (undiluted if necessary).
3. Apply the diluted Multishine with the Broom Brush, let it soak in for 1 minute and scrub the dirt away. Test on a small area first and work section by section.
4. Immediately rinse the treated surfaces thoroughly with clean water.

ZWIK Glass Cleaner

1. Open the bottle (child-resistant closure) and attach the supplied trigger.
2. Spray ZWIK onto the glass or surface you want to clean. Not sure whether it is suitable? Then test on an inconspicuous spot first.
3. Dry with the Microfibre Glass Cloth.

Tip: work from top to bottom and preferably do not clean in full sun, so that Multishine does not dry on. For high places, connect the brush block of the Broom Brush to the Telescopic Pole.

Important

1. Read all instructions on the labels carefully and follow them.
2. Keep out of reach of children.
3. Store in closed packaging in a dry, frost-free place.
4. Multishine and ZWIK cause skin irritation and serious eye damage. Wear protective gloves and eye/face protection during use. Wash your hands thoroughly after working.
5. Do not use in combination with other products. Multishine contains sodium metasilicate pentahydrate and <5% non-ionic surfactants. ZWIK contains <5% anionic surfactants and perfumes.
6. If on skin: wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.
7. If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if possible and continue rinsing. If symptoms persist, contact a doctor or poison control centre immediately.
8. If you feel unwell or have swallowed the product: call the emergency number immediately and keep the packaging with the label at hand.